We have been in business for over 40 years.
Our products are tested and true.
Some of our original overhead bins are still standing today!
Empty Bins weigh less than 4 Ton. All bins fall in the under 6500lb range.
Roofs are made of 14GA steel.
Pits are made of 12 GA steel.
The top fill opening is approximately 16” in diameter.
The bottom slide exit is approximately 1 Square Foot.
Bin legs a made of 6” X 6” X 15# I beam.
Bins are vented on the roof, above each leg and in the corners of the pit,
as well as the lid is designed to be self-venting.
White is the Standard Color for bins.
The inside of the bins is NOT painted.
We Do Not recommend putting sticky or wet feeds in our overhead bins.
A vibrator and vibrator plates can be installed at the time of purchase, or you can retrofit later.
Additional drive-through heights are available by special order. Prices will vary, depending on the height you would like.
We Strongly Recommend securing your to a cement bin pad. We have instructions below.
Delivery is available or you may haul your own.
We ask for a 40% down payment and a signed purchase agreement at the time you place your order. Balance is due at delivery.
Bins are built to order.
August through January is our peak season, place you order early!
Please call the office with any questions 402-966-2251
*Additional drive through clearance may be special ordered.
Copyright © 2024 Welder Manufacturing LLC - All Rights Reserved.
Powered by GoDaddy